Hardwood floors are the most effective choice for adding more beauty and class towards the space. These floors are generally nailed towards the wooden sub floor as opposed to gluing it. When installing the teak floor on the concrete, plywood ought to be laid because the subfloor. Here are few guidelines to install teak wood flooring on the concrete surface.
Very first the concrete surface is necessary to be cleaned properly by removing any dirt or dust. The cracks or gaps inside the cement ought to be covered with the epoxy mortar to make it smooth. The patch might be smoothened employing a trowel. Then the applied mortar needs to be left to dry for handful of hours. After this, electric sander could be utilised to sand the rough surface of the base floor and make it smooth.
Subsequent, mastic might be applied more than the cement slab and leave it to dry for at the least 3 hours. A polyethylene sheet wants to become laid on the whole floor. After all these settings, plywood sub-floors are laid on the base. About inch gap may be left among each piece of wood simply because the wood has the tendency to expand because of the climatic modifications. The plywood can be attached to the cement floor by means of concrete fasteners or masonry nails. At least 4 nails need to be utilized to nail down the plywood sheets to a floor for the firmness. Now, the hardwood floor can be nailed properly more than the plywood sheets. From the grooved edge, the nailing method of the woods can be started out, and calculated gaps may be left in between each nail.
Following finishing the total floor, the final row can be cut with respect to the floor size. Inside the exact same way, the teak flooring ought to also be done by leaving at the very least inch gap as these also expand throughout the change in climate.
0 Comments:
Post a Comment