Sanding Teak Floors

With stunning, eye-catching, mellow-gold or brownish-red look, teak floors are well-liked not simply because of a character, but also for their extreme hardness. This makes them much less vulnerable to damage than several other hardwood floors and durable, having a long lifespan flooring. Despite the fact that teak is not quickly damaged, like any surface it occasionally will will need restoration. The way teak floors are restored will depend on how it was damaged.

Surface Scratches

Rough up the scratched location with steel wool or a fine-grit sandpaper. Rub the whole scratched location within the path of the grain of the wood.

Pour some mineral spirits on a cloth. Wipe the scratched area of the teak wood floor using the cloth to eliminate any dust and debris. Enable the mineral spirits to dry on the floor.

Dip a small paintbrush in to the stain (or finish) you last employed to finish your floor. Apply the stain towards the scratched location. Wipe the stain using a cloth.

Allow the stain to dry for the proposed drying time on its label
Fill in any gouged or missing locations of wood having a wood filler that matches the tint within the color of one's floor - colour mastic filler is prefered putty for floors which sealant is inside a very good condition. Smooth more than the wood filler using a putty knife. Enable the wood filler to dry for the time listed on its instructions.

Sanding Teak Floors

There are some points, which makes floor sanding of teak floors diverse from other timbers.

Sand your teak floors with 24 or 40 grit sanding paper according to the level, existing sealant thickness and condition of the floors, placed on a belt floor sander. Sand inside the path of the grain. Sand the entire floor in overlapping passes. If you're sanding teak parquet flooring in herringbone pattern, make sure you sand in diagonal strips following the strips of the pattern.

The moment total, sand the floors with 60 grit sanding paper and here you'll be able to use the collected from the sanding dust, to produce a putty having a clear resin filler.

Vacuum the floor to take away any debris and sawdust just before continuing together with the teak floor restoration.

Sand the entire floor once again with 120 grit sanding paper on a belt sander and a hand sander. Continue with all the floor sanding till the floors are smooth to the touch.

Sealing the floors - start off with primer initial in case you are about to seal the floors with waterborne varnish. Follow two coats of waterborne varnish of the option. Two or thress coats of solvent based varnish could possibly be applied with out application of a primer. However, do consult the application direction of one's product.